QC Inspector Pro - Construction Quality Control Toolkit

QC Inspector Pro - Construction Quality Control Toolkit

QC Inspector Pro

Advanced Quality Control Toolkit for Construction & Manufacturing – Real-time Analysis, Reporting & Compliance

Instant Results

Live Calculations

Fully Responsive

Export Reports

ISO Compliant

Quality Tools

Quick Inspections

Reports

Concrete Strength Test

Required Strength (MPa)

Test Age (Days) 7 Days 14 Days 28 Days 56 Days

Test Results (MPa)

All samples meet requirements

Average: 32.5 MPa | Range: 31.8–33.2 MPa

Weld Quality Assessment

Weld Type Butt Weld Fillet Weld Spot Weld Lap Weld

Material Thickness (mm)

Defects Found Porosity, Undercut

Marginal Quality – Rework Needed

Defects: Porosity, Undercut

Dimensional Tolerance

Nominal Dimension (mm)

Tolerance Class f7 (±0.1 mm) h8 (±0.2 mm) h9 (±0.3 mm) h11 (±0.5 mm)

Actual Measurements (mm)

All within tolerance

Range: 499.9 – 500.2 mm

Inspection Checklist

System Type Structural Steel Mechanical Electrical Plumbing Fire Safety

Items to Inspect Bolt Torque Weld Quality Dimensional Accuracy Surface Finish Material Certification

Checklist generated for Structural Steel

5 items ready for inspection

Electrical Testing

Insulation & continuity

Water Pressure Test

Leak detection

Air Quality

Ventilation & CO₂

Fire Safety

System inspection

Thermal Imaging

Heat loss detection

Level & Plumb

Alignment check

Reports & Export

Generate professional PDF reports with inspection data, charts, and compliance status.

QC Inspector Pro v2.0 | Advanced Quality Control for Modern Engineering

Help Compliance Export Data

© 2024 QC Inspector Pro. All rights reserved. For professional use only.